1980 Deere 350B track loader 

1980 Deere 350B track loader. No leaks. No smoke or blow-by. Machine runs and operates good. 60% undercarriage. Work ready. Priced at $12,900.

1995 Cat D6H XL 

1995 Cat D6H XL with 9,400 hours. Cab with heat and ice cold air. Full forestry package. Limb risers, rear screens, Cat winch with power in/out and free spool. Very strong machine. No leaks, no smoke or blow-by. Tight blade and hard bar. Manual angle blade with twin tilts. Undercarriage is roughly 60%. Machine is […]

2004 Volvo EC210B LC 

Volvo EC210B LC with 6890 hours. 70% undercarriage. Cab with heat and air. Quick coupler, Auxiliary hydraulics with manual thumb. No leaks. No smoke or blow-by. Tight turntable. Work ready. Priced at 54,900! Delivery and financing available nationwide!

Cat 314DL CR 

Cat 314DL CR with 8,500 hours. Cab with heat and air. All cab glass intact. 70% undercarriage. Aux. Hyd. Hyd coupler. Backfill blade. Tight turntable. Strong hydraulics and tram motors. Priced at $45,900.

Volvo EC240B LC 

Volvo EC240B LC. 5,700 hours. 70% undercarriage. Cab with heat and air. Auxiliary hydraulics with hydraulic thumb. No leaks. No smoke or blow-by. Tight turntable. Strong hydraulics and tram motors. Priced at $46,900

2004 Cat 315CL 

2004 Cat 315CL. Machine has 7,800 hours. Cab with heat and air. All cab glass intact. Auxiliary hydraulics with Cat hydraulic thumb. Quick coupler. 36 inch bucket. No leaks, no smoke or blow-by. No cracks or welds. Tight turntable, strong hydraulics and tram motors. Priced at $58,900

Boom Truck 21 ton National on a 1998 Volvo 

Boom Truck 21 ton National on a 1998 Volvo, 13 speed Road Ranger. 2931 hrs. 80 foot main boom with 43 foot extendable jib. 3306 cat engine. Very nice, work ready truck. $55,900.

2002 Deere 650H LT 

2002 Deere 650H LT with 5870 hours. Cab with heat and air. Strong Undercarriage. Limb risers. Joystick control. No smoke or blow-by. Machine runs and operates as it should. Work ready! Priced at 47,900. Financing and Delivery available nationwide!

1998 Deere 120 

1998 Deere 120 with 6,500 hours. Cab with heat and air. Machine runs and operates good. 36 inch bucket. Auxiliary hydraulics. Good undercarriage. $32,900

160D LC 

160D LC with 7600 hours. Aux hydraulics, coupler. 36 inch bucket. No smoke or blow-by. No cracks or welds. Ice cold a/c. Machine is work ready! Delivery available nationwide! Priced at 59,900!

2012 Cat D6K LGP 

2012 Cat D6K LGP with 6,300 hours. Cab with heat and air. All cab glass intact. Very good undercarriage. No leaks, No smoke or blow-by. Machine runs and operates very good. Work ready. $92,900  

2005 Cat D5G LGP 

2005 Cat D5G LGP with 4,100 hours. Machine starts, runs, and operates good. Very good undercarriage. Limb risers and rear screens. No leaks. No smoke or blow-by. Work ready. Priced at $39,900.

1998 Deere 850C 

1998 Deere 850C with 7,100 hours. Cab with heat and air. Cab is missing one side glass. VPAT blade. Very good undercarriage, except pads. No leaks. No smoke or blow-by. Very good, work ready machine. Priced at $40,900

1999 Deere 750C 

1999 Deere 750C with 5,800 hours. VPAT blade. Very good undercarriage. Rear and side screens. Limb risers. No leaks. No smoke or blow-by. Machine runs and operates very good. Priced at $37,900. Work ready.  

2014 Cat 316EL 

2014 Cat 316EL with 4,600 hours. Cab with heat and air. Auxiliary hydraulics with Cat hydraulic thumb. Cat coupler. 80% undercarriage with rock guards. Tight turntable. Strong hydraulics and tram motors. No leaks. No smoke or blow-by. No cracks or welds. Very nice, work ready machine. $97,900. Financing and delivery available nationwide.

2018 Cat 918M 

2018 Cat 918M with 1,900 hours. Cab with heat, air, and radio. Tight center. Very good rubber. Quick coupler, and Aux. Hydraulics. Very nice, work ready machine. $95,900.

1998 Cat 928G 

1998 Cat 928G. Machine is showing 3,000 hours. Starts, runs, and operates very good. Cab with heat and air. 70% tires. No leaks. No smoke or blow-by. Tight center. Very good, work ready loader. Priced at $35,900. Located in eastern KY. We can have the machine sandblasted and painted for $4,000.